Sunjoy L-GZ288PST-4D Instructions De Montage page 4

Fig.1： Use Bolt (BB) and Flat Washer (CC) to fix Panel (B) and Panel (A).
Fig.2： Insert Long side support pole (D) into pole (E), attach pole (D) and (E) by using Bolt (AA) and Flat Washer
(CC).
Fig.3： Attach Pole C&D&E to Panel (A) and Panel (B) by using Bolt (BB) and Flat Washer (CC).
Hardware Pack used in Step 2
AA M6X15 Bolt
BB M6X32 Bolt
CC M6 Flat Washer
HH M6 Nut
Fig.4：Insert Corner connector (M&N) into panel (A) and (B).
Fig.5：Insert Pole (F) into Center Connector (J). (Notes: put the pole end with hole upwards as Fig 5-1 )
Fig.6：Insert end of Pole (F) into Corner Connector (M&N).
4 PCS
4PCS
12PCS
4 PCS