Ridecontrol One - Momentum HYBRID Mode D'emploi

5.4 RIDECONTROL ONE

In case of a system event, the RideControl ONE
display will show an indication of the event:
∙ Lighting indicator (H) will flash red, accompanied
by one of the event code indicators (L) that double
as power assist indicators. (Note: the event LEDs
are numbered from bottom to top):
∙ LED 5: Heat issue
∙ LED 4: not applicable
∙ LED 3: Speed sensor issue
∙ LED 2: Motor issues
∙ LED 1: battery issues
Switching the bike off and on will reset the system in
most cases. If so, continuing a bike ride is no problem.
∙ For LED 5, heat issue: The bike needs some time to cool down. Restart the bike after a few minutes.
Release stress on motor during high temperatures.
If the system events keep reoccuring, contact a dealer for final test results via Service Tool software.
24
LED 5
H
LED 1