Install Batteries; Setup And Operation - Honeywell Home RDWL313A2000 Guide D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Overview
Just follow these simple steps:

1. Install batteries.

2. Set up the doorbell and your preferences.
3. Install the doorbell and the push button.
Safety
Before proceeding with the installation, please note the following safety
warnings:
• Always follow the manufacturer's advice when using power tools and wear
suitable protective equipment (e.g. safety goggles) when drilling holes, etc.
• Before drilling holes in walls, check for hidden electricity cables and water
pipes. The use of a cable/pipe locator is advisable if in doubt.
Install Batteries
1. Open the battery cover and install 4
AA alkaline batteries.
2. Open the battery cover and install
the CR2032 battery.

Setup and Operation

Press the push button to test whether it is paired with the doorbell. The
doorbell will light up and ring. If it does not, see "Connect a Push Button" on
page 5.
Change the Tune
Press the Music button to change the
doorbell tune.
Every time you press the Music button,
the tune will change. Stop pressing the
Music button when you hear the tune
you want:
33-00183EFS_A.indd 2
2
+
Ding Dong
Westminster
Piano
Fantasy
Soft Alert
Smart Sax
4/15/2016 3:20:21 PM

Publicité

Table des Matières
loading

Table des Matières