Display Controls - Hisense PureFlat RF27A3FSE Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9

Display Controls

Your product has one control panel which is installed on the top cover, it may be different
depending on the model. Use your appliance according to the following control
guidelines.
When the appliance is powered on for the first time, the backlighting of the icons on the
display panel will light up immediately. If no buttons have been touched or the doors are
closed, the backlighting will turn off after 60seconds.
The control panel consists of two areas about temperature, and one area about different
modes.
Caution!
When you set a temperature, you set an average temperature for the whole refrigerator
cabinet. Temperatures inside each compartment may vary from the temperatures
displayed on the panel, depending on how much food you store and where you place it.
High or low room temperature may also affect the actual temperature inside the appliance.
Fridge Temperature Control
Press the Fridge button to turn on the refrigerator temperature control, then press
the Fridge button to select a temperature setting.
If you have set the temperature type to Celsius, the temperature settings cycle from 8°C to
2°C in one degree decrement.
If you have set the temperature type to Fahrenheit, the temperature settings cycle from
47°F to 35°F in one degree decrement.
Note:
 If you want to exchange the "℉" to "℃", please press and hold the "Super Cool" and
"Energy Saving" buttons for 3 seconds.
Super Cool
If you want to increase the cooling accelerator to cool products in Fridge, please
touch this button. The super cool icon "
is set to 35℉(2°C).
temperature
Super cool automatically switches off after 3 hours, and the refrigerator temperature setting
will revert back to the previous setting.
When super cool function is on you can turn it off by pressing the "Super Cool" button
or setting fridge temperature. To manually turn off the Super Cool function, the fridge
temperature setting will revert back to the previous setting.
The fridge will not retain the Super Cool function when powered off.
" will be illuminated, and the fridge

Publicité

Table des Matières
loading

Table des Matières