Display Controls - Hisense RF254N6CSE Guide D'utilisation Et D'entretien

Display Controls

Your product has one control panel which is installed on the fridge door. Use your
appliance according to the following control guidelines.
When the appliance is powered on for
the first time, the backlighting of the
icons on the display panel start working.
If no buttons have been touched or the
doors are closed, the backlighting will
turn off after 60 seconds.
The control panel consists of two areas
about temperature, and one area
about different modes.
CAUTION!
When you set a temperature,
you set an average temperature for
the whole refrigerator cabinet.
Temperatures inside each
compartment may vary from the
temperatures displayed on the
panel, depending on how much
food you store and where you place
it. High or low room temperature
may also affect the actual
temperature inside the appliance.
Child L ock and D oor Alarm
This button serves two purposes:
1. Child L ock
Press and hold "Alarm" for 3 seconds to lock
the control panel including the dispenser
function. If the control panel is locked, the
icon " " will be on, and none of the buttons
on the control panel work. To unlock the
control panel, please press and hold "Alarm"
again for 3 seconds.
2 .. D oor A larm
When the Door Open alarm occurs, the
alarm icon will flash and abuzzing sound
will occur. Press the"Alarm"button and the
alarm icon will stop flashing and the buzzing
will stop. When the door is closed or opened
for along time, the alarm icon will turn off.
Ice Control
This button controls the ice maker. You can
touch the "Ice Off" button to control the
ice maker. When the "Ice Off" function light
is off, the ice maker is working. If you want to
turn off the ice maker, please touch the "Ice
Off" button again until the icon light is on.
11