Installing Your New Appliance - Hisense PureFlat RF27A3FSE Mode D'emploi

5

Installing Your New Appliance

Before using the appliance for the first time,
you should be informed of the following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not castors, should
be only used for forward or backward
movement. Moving
sideways may damage your floor and the
rollers.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it
maintain good ventilation around the
appliance for the dissipation of heat. For
this reason, sufficient clear space should
be available around the refrigerator.
Suggestion: It is advisable for there to be
at least75mm of clearance from the back
of the fridge to the wall, at least 100mmof
clearance from its top, at least 100mm from
its side to the wall and a clear space in front
to allow the doors to open 125°. As shown
in following diagrams.
the refrigerator
is necessary to
Note:

This appliance performs well within the
climate class from N to T shown in the table
below. It may not work properly if left at a
temperature above or below the indicated
range for a long period.
Climate class Ambient temperature
SN
N
ST
T

Stand your appliance in a dry place to
avoid high moisture.

Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
Leveling of appliance
For sufficient leveling and air circulating in
the lower rear section of the appliance, the
bottom feet may need to be adjusted. You
can adjust them manually by hand or by
using a suitable tool.
To allow the doors to self-close, tilt the top
backwards by 10-15mm.
10℃～ 32℃
16℃～ 32℃
16℃～ 38℃
16℃～ 43℃