Hilti GPB 6X-A22 Mode D'emploi page 22

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a hand-held, cordless satin finisher. It is designed for surface finishing processes
such as satinizing, structuring, polishing, brushing, smoothing, derusting or deburring steel, stainless steel
or non-ferrous metals.
▶ Use only Hilti Li­ion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Possible misuse
Do not use the product for wet grinding.
Do not use the product to work on hazardous or flammable materials (e.g. asbestos, magnesium, wood).
3.4 Items supplied
Satin finisher, pneumatic rubber roller, air pump, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group
3.5 Temperature-dependent motor protection
The temperature-dependent motor protection system monitors current input and motor temperature and
thus prevents the power tool overheating.
If the motor is overloaded through application of excessive working pressure, the power tool's performance
drops noticeably or it may stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the tool and
then allow it to run under no load for approx. 30 seconds.
3.6 Li-ion battery charge status display
The charge status of the Li­ion battery is displayed after one of the two battery release buttons is pressed.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights up.
1 LED flashes.
16 English
1
@
;
=
%
&
(
)
+
§
/
:
∙
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
Battery release button
Battery
Adjusting knob for speed
Lockable on/off switch
Clamping lever for adjustment of grip and
guard
Grip
Hood
Chuck
Locking screw for fence
Fence
Locking ring for hood attachment
Dust filter
2241316
*2241316*