About your Mini-bar
Before use
Please read these instructions carefully before using your mini-bar.
This is intended for household use and is to be installed inside.
Installation
Location
When you choose the place of installation for your mini-bar, you must ensure that the floor is flat and solid,
and that the room is well ventilated with a temperature between 16 and 32°C. Avoid installing next to a heat
source such as an oven, boiler, radiator, etc...
Keep out of direct sunlight.
If you place your mini-bar in an outbuilding or garage, ensure that the location is not humid, as condensa-
tion could form.
Your appliance must be installed leaving a gap of 10cm to the rear and 2cm to each side.
The mini-bar features a reversible door, which can be opened to the left or to the right.
Never cover the appliance with a sheet or cover.
Placement – fitting
Position the appliance opposite the desired location, and slide gently into place.
Page 7