Breguet 8928 Mode D'emploi page 5

8928/8929
R N
"
EINE DE APLES
-
WATER RESISTANT TO
The crown has two positions:
1. Neutral position
(manual winding)
2. Time-setting position
" , -
WATCH OFF CENTRED HOUR CHAPTER RING
30 (15
M M FOR MODELS SET WITH BAGUETTES
Starting the watch
Crown in position 1. This position
enables manual winding of the
self-winding movement, meaning
winding by rotating the crown
upwards ( ), about 30 to 35 turns.
Afterwards, when worn on the wrist,
the watch is automatically rewound.
Fully wound, the watch will keep going
for about 40 hours off the wrist.
Setting the time
Pull the crown out to position 2. Turn
the crown upwards ( ) to move the
hands forwards to the desired time.
For accurate time-setting, ensure that
the last operation was done in a clock-
wise direction. Then push the crown
back to position 1. After this opera-
tion, rotate the crown downwards
( ) to make sure it turns freely.
6
, - ,
SELF WINDING
)