Meec tools 082-211 Mode D'emploi page 15

IMPORTANT: Only use spare parts and accessories recommended by the manufacturer.
• Never immerse the spray gun in solvent or other fluid.
• Be careful never to damage the holes in air cap, paint nozzle or paint nozzle.
Spray patterns Problem
•
Uneven
•
•
•
Half moon format
•
Thicker at one end
•
•
Thinner in the
middle
•
•
Thicker in the
middle
•
•
ENGLISH
TROUBLESHOOTING
Air leaks in between the paint
nozzle and the connection.
Air leaks in between the air
setting ring and body or the
connection.
Air leaks in by the needle lock
nut.
Air leaks in between the paint
hose and the container.
Clogged hole in the air cap.
Blockage between the paint
nozzle and air cap.
Blockage at the paint nozzle's
outlet.
Too low viscosity.
Excessive paint flow.
Too high paint viscosity.
Excessive paint flow.
Action
Dismantle and clean the parts and
•
refit. Replace the parts if they are
damaged.
• Dismantle and clean the parts and
refit. Replace the parts if they are
damaged.
• Tighten the needle lock nut.
• Dismantle and clean the parts and
refit.
• Clean the nozzle with a nylon brush
(not a metal brush).
Dismantle and clean the parts and
•
refit. Replace the parts if they are
damaged.
• Add undiluted paint too increase
the viscosity.
• Turn the spray valve for less paint
flow (gives smaller spray pattern).
• Add solvent to reduce the viscosity.
• Turn the spray valve for more paint
flow.
15