Hkoenig apl1800 Manuel D'instructions page 5

Appareil à fondue
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
extension cord should be a
grounded-type 3-wire cord. To avoid pulling,
tripping or entanglement, position the extension
cord so that it does not hang over the edge of the counter,
table or other surface area.
Use an electrical outlet that accommodates the
polarized plug on the fondue. On a polarized plug, one
blade of the plug is wider than the other.
If the plug does not fit fully into the outlet or extension
cord, reverse the plug. If the plug still does not fit fully,
contact a qualified electrician. Do not alter the plug.
Do not use an outlet or extension cord if the plug fits
loosely or if the outlet or extension cord feels hot.
Keep the cord away from hot parts of the appliance and
hot surfaces during operation.
Do not operate this appliance if it has a damaged cord
or plug, if it is not working properly or if it has been
damaged or dropped. If the supply cord is damaged, it
must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
CAUTION
To prevent personal injuries, read and follow all
instructions and warnings.
Always attach heat control to fondue pot first, then plug
cord into electrical outlet. After cooking and serving, turn
heat control to "off" and unplug from electrical outlet. Let
fondue pot cool before removing heat control.
Do not touch hot surfaces. Use knobs if you lift or carry
the fondue pot or cover when it is hot.
Moving an appliance containing hot foods, liquids is

Publicité

Table des Matières
loading

Table des Matières