PR 9113 Mode D'emploi page 53

action
15 Verify CJC type and press OK
(ONLY IF SeNSOR = TC and CH1.TYp = TeMp)
16 Verify fixed output range and press OK
17 Verify fixed output value on detected sensor error
and press OK
(ONLY IF CH1.TYp = TeMp, or IF I.RaNGe = 4-20
ma)
18 Verify temperature for 0% output and press OK
(ONLY IF CH1.TYp = TeMp)
19 Verify temperature for 100% output and press OK
(ONLY IF CH1.TYp = TeMp)
20 Verify analogue output response time and press OK CH2.TYp
21 Verify input type for Channel 2 and press OK
22 Verify fixed input range and press OK
(ONLY IF CH2.TYp = CuRR)
23 Verify sensor connection type and press OK
(ONLY IF SeNSOR = Ni or pt and CH2.TYp =
TeMp)
24 Verify temperature unit and press OK
(ONLY IF CH2.TYp = TeMp)
25 Verify temperature sensor type and press OK
( ONLY IF CH2.TYp = TeMp)
26 Verify pt sensor type and press OK
(ONLY IF SeNSOR = pt and CH2.TYp = TeMp)
9113 TeMpeRaTuRe / ma CONVeRTeR
Version No. V5R0
Display shows
O.RaNGe
OuT.eRR
OuT.LO
OuT.HI
ReSp
I.RaNGe
CONNeC
uNIT
SeNSOR
pt.TYpe
Ni.TYpe
Safety Manual
15