LGB 65011 Mode D'emploi page 5

Function
When the throttle is turned up, the Sound Unit Power
Storage is recharged automatically. When track power is
turned off, the Sound Unit Power Storage returns the en-
ergy to the sound circuit. The standing sounds are played.
Hint: If this product is not used for a long time, its capa-
citors will discharge, and the sound system will operate
erratically. To recharge the capacitors, operate the
connected loco at brisk speed for about 30 seconds.
Power Supply
Use this product with LGB power supplies with an output
of at least 1 amp.
Multi-Train System
Attention! With the 65011 Sound Unit Power Storage
installed, it can be difficult to program or read decoder
settings. If this occurs, disconnect the Sound Unit Power
Storage or switch off the loco sound using the power
control switch, if possible. If this is not possible, make
sure the Sound Unit Power Storage is fully charged
before you start programming.
5