AKASO V50 Mode D'emploi page 6

Remote
Power Button
Press the Power Button for 3s to turn on/off the remote.
How to Connect the Remote to Camera?
1. Press Power/Mode Button on the camera.
2. Enter CameraSetting, turn on the BT.
3. Turn on the remote.
4. The screen shows message "BT Paring", then shows message "BT Paired Success".
Video Button
To record Video, verify the camera is in Video mode.
To start recording:
Press the Video Button. The camera will emit one beep and the camera light will flash while
recording.
To stop recording:
Press the Video Button again. The camera will emit one beep and the camera light will stop
flashing.
Photo Button
To capture a photo, verify the camera is in Photo mode.
To take a photo:
Press the Photo Button, The camera will emit camera shutter sound.
Burst Photo
To capture a Burst Photo series, verify the camera is in Burst Photo mode.
To take a Burst Photo series:
Press the Photo Button, The camera will emit camera shutter sound.
Power Button
Photo Button
Video Button
Splashproof only, not waterproof
7
To take a Burst Photo series:
Press the Photo Button, The camera will emit camera shutter sound.
Time Lapse Video
To record Video, verify the camera is in Time Lapse Video mode.
To start recording:
Press the Video Button. The camera will emit one beep and the camera light will flash while
recording. The camera records video at 1s/3s/5s/10s/30s/1m intervals.
Time Lapse Photo
To capture a Time Lapse series, verify the camera is in Time Lapse Photo mode.
To take a Time Lapse series:
Press the Photo Button, The camera initiates countdown and emits camera shutter sound each
time a photo is taken.
Contact Us
For any inquires with AKASO products, please feel free to contact us, we will respond
within 24 hours.
E-mail: cs@akasotech.com
Tel: (888) 466-9222 (US) Mon-Fri (except holiday) 9am-5pm (EST)
Official website: www.akasotech.com
8
English