Technical Specifications - Festo PEV-1/4-B-M12 Notice D'utilisation

PEV-1/4-B-M12
10

Technical specifications

Type
Part no.
Design
Medium
Fitting position
Connection
Adjustable switching pressure
Hysteresis
Permitted temperature range
Operating voltage
Max. switching current
Min. loading current
Max. contact loading
– ohmic load
– inductive load
Usage category
Switching time at 6 bar
Permitted switching frequency
Protection class
Reproducibility
Materials
Fig. 14
Festo 0005NH– English
PEV-1/4-B-M12
192 488
Mechanical pressure switch
Filtered (min. 40 m m), lubricated or non-lubricated compressed air
As desired
G 1/4 (pneumatic); M12 (electric)
1...12 bar (as at delivery: 6 bar ± 0,5 bar)
Can be set (see diagram in section "Commissioning";
as at delivery: 1,2 bar ± 0,3 bar)
- 20 °C ... + 80 °C (dew point must not be reached at < 1 °C)
dry compressed air
(use
Max. 48 V DC/AC (rated measuring voltage: 24 V DC)
5 A (ohm. load) (rated measuring current: 4 A ohm. load; 3A ind. load)
1 mA (24 V DC/AC); 10 mA (10V DC/AC); 100 mA (5 V DC/AC)
DC 30 V 5 A
DC 30 V 3 A
AC 12/DC 12 (ohmic load)
AC 14/DC 13 (small electromagnetic load and electromagnets)
On: 1,5 ms (typical), Off: 3 ms (typical)
max. 5 Hz
IP 65 as per EN 60529 (with correctly fitted connection socket)
± 3% with constant temperature
Housing: aluminium (coated), PA, PE
Plug, contacts: brass (chromium plated/gold plated)
Seal: NBR
Micro switch: silver contacts
)
18