Centrometal CSK-Touch Instructions Techniques page 37

All manuals and user guides at all-guides.com
ENG
Settings
3.1.x. Language selection
When connecting a digital corrector for the first time, the digital corrector asks you to choose a
language that will display information on the screen. After selecting the language for the first time,
the language selection menu automatically is off. If you wish to change the language of the
corrector later, you need to activate the language selection in the menu 3.1.x. Language selection,
turn off the corrector 3.7. Shutdown and the language selection will appear on restart (long press
on the screen). After selecting a new language, it is necessary to retrieve the data from the boiler
control unit 3.1.x. Get data.
3.2. Views
In the Views menu, you can define the number of views or correctors that can be monitored on this
digital corrector and define the name of each view and assign it a heating circuit that it controls. On
the main screen, depending on the number of views selected, the letters of the view appear in the
menu bar (from A to H, user-assigned names are only visible on the selected screen, not in the
menu bar). If there are more than 2 views, the other views are selected by pressing the "..." menu
(three dots) followed by the other selected views. After clicking on one of the desired views, the
menu bar returns to the possible selection of the first 2 views.
3.2.1. No. of views
Selects the number of views or associated room correctors that can be controlled via this digital
corrector. If only this digital corrector exists, the
number 1 must be selected
3.2.x. View A/B/C/D/E/F/G/H
3.2.x.1. View Name
Each view can have a name according to the user's wishes (eg Living Room, Ground floor ...).
3.2.x.2. Heating circuit
Each view must be assigned a heating circuit wich is controled by this view (usually each corrector
controls its own heating circuit).
Select 0 at boiler heating circuit at
BioTec-L and BioTec Plus boilers.
3.3. Measurement corr.
If the measured temperature on the digital corrector
deviates from the actual room temperature, in this menu the measured temperature on the digital
corrector screen can be corrected.
3.4. Display
Menu for changing the settings of the digital corrector screen.
3.4.1. Background
Selects the background image of the screen that will
be displayed in the normal operation of the corrector.
3.4.2. Backlight
The intensity of the backlight when the corrector is in normal operation or when the settings are
changed.
Technical instructions CSK-Touch
Factory:
Language selection
menu bar
Factory:
No. of views
Factory:
Heating circuit
Factory:
Measurement corr.
Factory:
Background
Backlight
setting
ON OFF / ON
min./max.
1
min./max.
0
min./max.
0 -5.0 / 5.0 °C
min./max.
1
100 30 / 100 %
1 / 8
0 / 255
1 / 6
37