Ancona UCC630 Manuel D'instructions page 11

Step 3 : Attaching the unit under the kitchen cabinets
• Mark or drill a small hole on the mounting position according to the space and dimensions cited on the following drawings.
. • Install the hood under the cabinet using suitable screws to fix in position.
Attach the range hood under the kitchen cabinets and ducting to the top round 6" damper and exhaust outdoors.
•
The following drawings show the mounting dimensions of the 30" (750mm) width and 36" (900mm) width.
•
Attaching under kitchen cabinets using 6" round ducting
Fig # 3
Step 4: Installing Filters
•To install filters: (See Figure #4)
• Angle the filter into slots at back of the hood
• Push button on handle of the filter
• Release the handle until the filter fits into a resting position.
•
Repeat to install all filters.
SAFETY WARNING: Risk of electrical shock. This range hood must be properly grounded. Make sure
this is done by a qualified electrician in accordance with all applicable national and local electrical codes.
Before connecting wires, switch power off at service panel and lock service panel to prevent power from
INSTALLATION:
Fig # 4
being switched on accidentally.
11