Sharp D4 Serie Documentation Technique page 46

E11
Dryer Board Communication Error
Are e nvironmental
conditions are OK?
Check PCB socket
connections. Is thee any
loose socket/connector?
Similarly check dryer
board connectors. Is it
loose?
Check the communication cable
ports? Are there any non - conductive
ports?
Replace drying
board. Does it still
give E11 error?
Replace PCB
Prapared by Customer Technical Supoort Department in Vestel Washing Machine Plant – Manisa – Turkey
Do not run WM till enviromental conditions in
product specification s are met
Refit loose sockets/connectors, replace cable
group if connectors/sockets are worn
Replace Cable Group
Page 46
Environmental conditions:
- Voltage range should be in as specified
in instruction book.
- Water pressure should be as specified
in instruction book .
- WM should be grounded properly.
- There should be enough ventilation
space from ground.
- Other environmental specifications and
requirements should be met which are
mentioned in instruction book of WM.
NO
YES