Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
UK
NL
DE
FR
Dear Customer,
Many thanks for the confidence in our products, which you have shown by purchasing your new Powerhand (Universal locking wheel
nut remover kit). Every Powerhand is carefully tested and is subjected to the strictest quality control procedures. To maintain a long
service life of your tool, please read the operating and maintenance instructions thoroughly.
1. In this operating manual the following symbols are used:
Read the operating manual carefully
Wear eye and ear protection
Wear protective work gloves
2. Declaration of compliance
On our own responsibility, we hereby declare that this product complies with the standards or standard-setting documents as listed on the rear page.
3. Safety instructions
Before using this tool, read the operating instructions thoroughly. Keep all documents supplied with the tool in a safe place and pass them
on to other users.
Only use this tool the way it is designed to. All modifications are strictly prohibited and may cause serious injury.
4. Protection
1
2
Always wear:
1) protective work gloves
2) eye protection and ear protection
3) a dust mask
4) safety, non-slip shoes
Working with striking tools can result in serious injury caused by:
• Chips, dust and other particles
• Toxic fumes
• Excessive exposure to vibration
• Excessive exposure to noise
5. Safety
• DO NOT use the tool if damaged or thought to be faulty
• Ensure that health & safety, local authority regulations and general workshop practice
regulations are adhered to when using tools
• DO NOT use the tool for a task it is not designed to perform
• DO NOT use the tool unless you have been instructed in its use by a qualified person
• DO NOT operate the tool if you are tired or under the influence of alcohol, drugs or
intoxicating medication
• Maintain the tool in good condition
• Follow all workshop safety rules, regulations and conditions
• Maintain correct balance and footing. Ensure the floor is not slippery
• Keep children and non essential persons away from the work area
6. Part number description
1 Impact driver
2 Center punch
3 Main body & outer guard
4 Hand protection ring
5 Blade A
6 Blade B
7 Blade C (available in packs of 10)
8 1/2" impact socket 24 mm
3
Wear a dust mask
Your special attention is asked for important
specific instructions or safety risks
5
6
1
8
7
4
2
3
3
Publicité
Table des Matières
