Kinderkraft LUMI Guide D'utilisation page 22

Technical data:
Battery power supply: 4 pcs x AAA 1.5 V
Power supply via USB-DC cable (included): requires a power supply unit with USB-A port with
the following output parameters: voltage 5.8V– 6.0V
time of the rocker on batteries (depending on battery type is a maximum of 5 hours).
Remote control power supply: 1 pc x CR2025 3 V
Product description
no.
1
3
5
Product assembly/disassembly:
Follow the fig. A and I.
The installation should take place on a soft ground that will not damage the surface of the
elements. All parts of the rocker (1,2,3,4,5) should be carefully inspected after taking it out of
the box and make sure that none of them are damaged. Place the foot of the rocker (2) on the
ground. With both hands, grasp the seat (1) and gently push the seat pin into the hole in the
foot (Figure A). When the elements connect, you will hear a characteristic sound (click).
Attention! Adjust the shape so that the seat can connect to the foot without obstacles or force.
Slide the toy bar (3) onto the seat frame (Figure B). To dismantle the product, press the metal
button at the back of the foot of the rocker (Figure C) and then, with firm move, separate the
seat from the foot of the rocker. The seat cover can be removed by using the zippers. Unfasten
the two zippers located at the back of the seat in the direction of the arrows (fig. D) and remove
the seat cover. The rocker has a rocking function. If you want the seat to swing to the sides,
move the locking button upwards (Figure I). Attention! Do not activate the rocker function if
the button is in the motion blocking position. The rocker has two belt heights. Choose one of
these depending on the size of your child.
WARNING! The remote control contains a button-cell batteries. If
swallowed, the button battery can cause internal chemical burns. Dead
batteries should be discarded immediately. Keep new and dead button-cell
batteries away from children. If you think the batteries may have been
swallowed or placed in any part of the body, call medical attention
immediately.
Item description
Seat
Toy bar
USB-DC cable
(not included)
, minimum current 1A. Estimated run
(included in the set)
no.
2
4
22
Item description
Rocker foot
Remote