Operation - Klarstein BAROSSA 40D Mode D'emploi

• This unit is not designed for use in a garage or any other outside installation.
• Avoid locating the wine cooler in moist areas.
• Plug the wine cooler into dedicated, properly installed-grounded wall outlet. Do not
under any circumstan- ces cut or remove the third (ground) prong from the power
cord. Any questions concerning power and/or grounding should be directed
toward a certified electrician or an authorized service center.
• This unit is not designed to be installed in an RV or used with an inverter.
• After plugging the wine cooler into a wall outlet, turn the unit on and allow the unit
to cool down for 3-4 hours under before placing wine bottles or beverages in the
appliance.
• Keep ventilation openings in the appliance enclosure, clear of obstruction.

OPERATION

Control Panel and Buttons
Light button: To turn the inner light on or off.
Plus button: Used to increase the set temperature by 1 °C or 1 °F
Minus button: Used to lower the set temperature by 1 °C or 1 °F
SET: Set or view the internal temperature setting for each zone.
Selector Display
Switching display temperatures in Celsius or Fahrenheit. To choose one of these displays
press the button for 5 seconds.
Select the Temperature
Your wine cellar has one single compartment. The temperature can be chosen between
5°C and 18°C (40° and 65°F).
EN
19