Mitsubishi DiamondPoint NXM56LCD Manuel De L'utilisateur page 12

Controls
Information
DISPLAY MODE: Indicates the current display resolution and frequency setting
of the monitor.
MONITOR INFO.: Indicates the model and serial numbers of your monitor.
OSD Warning: OSD Warning menus disappear with Exit button.
NO SIGNAL: This function gives a warning when there is no signal present.
After power is turned on or when there is a change of input signal or video
is inactive, the No Signal window will appear.
RESOLUTION NOTIFIER: This function gives a warning of use with opti-
mized resolution. After power is turned on or when there is a change of
input signal or the video signal doesn't have proper resolution, the
Resolution Notifier window will open. This function can be disabled in
the TOOL menu.
OUT OF RANGE: This function gives a recommendation of the optimized
resolution and refresh rate. After the power is turned on or there is a
change of input signal or the video signal doesn't have proper timing, the
Out Of Range menu will appear.
NXMLCD122702.p65
–continued
10
10 12/27/02, 3:32 PM