Controls - Mitsubishi DiamondPoint NXM56LCD Manuel De L'utilisateur

Controls

OSD (On-Screen Display) control buttons on the front of the
monitor function as follows:
To access OSD menu, press any of the control buttons ( < , > , –, +,
To change signal input, press the SELECT button.
NOTE: OSD must be closed in order to change signal input.
EXIT
< / >
–/+
SELECT
RESET/MUTE
NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear
allowing you to cancel the RESET function by pressing the EXIT button.
Sound
Volume
Control the sound volume of speakers and headphone.
To mute the speaker sound, press the MUTE key.
Brightness/Contrast Controls
BRIGHTNESS
Adjusts the overall image and background screen brightness.
CONTRAST
Adjusts the image brightness in relation to the background.
AUTO (Analog input only)
AUTO
Adjusts the image displayed for non-standard video inputs.
Auto Adjust
Automatically adjusts the Image Position and H. Size settings and Fine settings.
Image Controls
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE
Adjusts the horizontal size by increasing or decreasing this setting.
FINE
Improves focus, clarity and image stability by increasing or decreasing this setting.
NXMLCD122702.p65
Menu
Exits the OSD controls.
Exits to the OSD main menu.
Moves the highlighted area left/right to select control menus.
Moves the highlighted area up/down to select one of the controls.
Moves the bar left/right to increase or decrease the adjustment.
Active Auto Adjust function. Enter the OSD controls. Enter the OSD sub menu.
Resets the highlighted control menu to the factory setting. When no OSD
menu is shown, the speaker sound will be muted.
(Analog input only)
(Analog input only)
8
8
).
EXIT
12/27/02, 3:32 PM