Mitsubishi DiamondPoint NXM56LCD Manuel De L'utilisateur page 9

Quick Start
This LCD monitor is designed for use with a flexible arm.
Please use the attached screws (4pcs) as shown in the picture when installing.
To meet fhe safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the
monitor.
The LCD monitor should only be used with an approved arm (e.g. GS mark).
Specifications
NXMLCD122702.p65
–continued
NXM56LCD: 75mm
NXM76LCD: 100mm
If using other screws, check depth of hole.
7
7
Thickness of Bracket (Arm)
2.0~3.2mm
Tighten all screws.
NXM56LCD: 75mm
NXM76LCD: 100mm
Weight of LCD assembly:
NXM56LCD: 3.5kg (MAX)
NXM76LCD: 4.7kg (MAX)
12/27/02, 3:32 PM