Colour Edit; Convergence - NAMCO TEKKEN 5 SUPER DX Mode D'emploi

4-2-2

Colour Edit

1 Ensure that the Colour Edit Adjustment Box is showing. (Press P1 Button 3
if the Adjustment box is not displayed.
2. Use the Joystick UP/DOWN to step to the required adjustment.
(Contrast, Brightness (red), Brightness (green), Brightness (blue)).
3. Use the Joystick LEFT/RIGHT to adjust the value.
3. When all adjustments have been made, press P1 Button 1 to step to the
Convergence Test or P1 Start Button to return to the Main Test Menu screen
4-2-3

Convergence

Use this screen to adjust the geometry (height, width , etc.) of the Monitor.
D I S P L A Y T E S T
C o n v e r g e n c e
The screen colour will change each time P1 Button 4 is pressed.
When all adjustments have been made, press P1 Button 1 to return to the Colour
Bar Screen or P1 Start Button to return to the Main Test Menu screen.
P r e v i o u s C o l o r
EXIT color edit
NEXT
EXIT
Page 36
Interlace
: 150
Contrast
: 100
Bright R
: 100
Bright G
: 100
Bright B
P1-Button4
:
P1-Button3
:
P1-Button1
:
P1-Start
: