NAMCO TEKKEN 5 SUPER DX Mode D'emploi page 35

4-2-1 Display Test
This test allows the following checks and adjustments to be made.
•
Colour Edit
Adjust contrast and brightness of each colour to match video output from the
PCB to the Monitor.
Note: This adjustment should only be made if the correct picture quality cannot
be achieved by using the normal monitor adjustments.
•
Convergence
Check and adjust the size, position and distortion of the screen image.
1. Select display Test from the Test Menu Screen, the following screen is displayed.
DISPLAY TEST
Color bar
P r e v i o u s C o l o r
EXIT color edit
NEXT
EXIT
2. Each time the 1P Button 3 is pressed the Colour Edit adjustment box is turned
ON or OFF.
DISPLAY TEST
Color bar
Previous Color
EXIT color edit
NEXT
EXIT
3. Press the 1P Button 1 to step to the next test function
COLOUR BAR
>
Interlace
Contrast :
Bright R :
Bright G :
Bright B :
: P1-Button4
: P1-Button3
: P1-Button1
: P1-Start
: P1-Button4
: P1-Button3
: P1-Button1
: P1-Start
CONVERGENCE
Page 35
Overall contrast
**
Brightness (red)
**
Brightness (green)
**
Brightness (blue)
**
Color bar (white)
Color bar (red)
Color bar (green)
Color bar (blue)
Reset Colour Edit values to factory defaults
Colour Edit ON /OFF
Select next test pattern
Return to test menu screen
Overall contrast
Brightness (red)
Brightness (green)
Brightness (blue)
Color bar (white)
Color bar (red)
Color bar (green)
Color bar (blue)
Reset Colour Edit values to factory defaults
Colour Edit ON /OFF
Select next test pattern
Return to test menu screen