Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Close the door and mount the wall plate
22
Mount the wall plate using the provided
screws. Install all three screws for a
secure fit on your wall.
Tip: Prior to tightening the screws, use a
level to ensure the wall plate is level.
Attach your thermostat
23
Align the thermostat on the wall plate
and firmly snap into place.
Go back to your circuit breaker box.
Turn power back on
24
Turn on the switch that controls your
heating and cooling system.
Go back to your thermostat.
Complete setup on the thermostat
25
Remove the protective film and confirm
that your thermostat reads "Welcome."
If you do not see this, visit
HoneywellHome.com/support or
call 1-855-733-5465 for more help.
Breaker box
12
ON
ON
OFF
Switch
Welcome!
Publicité
Table des Matières
