Dip Switches; Power Save Mode - Phocos PSW Serie Guide De L'utilisateur

[3] Output outlets
Universal outlet is standard.
[4] Load level indicator
Off is very low AC power operation. Green is low to medium AC power operation. Orange is
medium to high AC power operation. Red is very high AC power operation and overload
shutdown.
[5] Status indicator
Green shows inverter is powered on. Red means a failure or the inverter is operating a
protection feature. Alternating green and red means the inverter is in power save mode.
3.3

DIP Switches

DIP Switch Setting
S4 O: 50 Hz
S3 O: OFF
S2 O: OFF
S1 O: OFF
3.4

Power Save Mode

When a power saving mode is selected, the inverter will use less power when no load is
present. The status LED will alternate between green and red when no load is present.
Power saving mode causes a brief delay to turn loads on. Power save mode is compatible
with loads that draw power continually like a television. Power save mode may not be
compatible with loads that draw power intermittently like a power tool.
www.phocos.com
[6] Dip switch setting
Adjust settings for frequency and power
save mode.
I: 60 Hz
I: 15% loading power
I: 10% loading power
I: 5% loading power
Note: DIP switches must be
adjusted while inverter main
switch is OFF.
15 | P a g e