Clarity C110 Mode D'emploi page 9

If you have digital cable or satellite, plug the
C110 into the digital cable or satellite box
if possible.
Connect the RCA jacks to the output of the
TV or VCR. Connect the other end of the
cord to both the left and right RCA ports
on the C110 base. Next, select "STEREO" on
the "MONO/STEREO" switch on the base.
If the television (or other audio equipment)
has only one RCA port, connect the left (white)
RCA jack from the output into the left (white)
RCA port of the base. The right (red) jack
should remain unplugged on both ends. Next,
select "MONO" on the "MONO/STEREO"
switch on the base. See Figure 5.
B. RCA – 3.5mm Mode
This should be used if the television (or other
audio equipment) has only a 3.5mm jack.
This enables the C110 to be used with
computers, CD players, stereos, MP3 players,
and other related products.
Use the cord with the RCA jacks on one end
and the 3.5mm jack on the other. Plug the
3.5mm jack into the device and connect the
RCA jacks in the C110 base. See Figures 6
to 9. Next, select "STEREO" on the "MONO/
STEREO" switch located on the C110 base.
All manuals and user guides at all-guides.com
C110 INSTALLATION
R
TV
W
FIG. 5
STEREO MONO
TV
3.5mm jack
FIG. 6
Computer
FIG. 7
CD Player
FIG. 8
MP3
Player
FIG. 9
9