Installing The Batteries; C110 Headset - Clarity C110 Mode D'emploi

SETTING UP THE C110 HEADSET

Installing the Batteries

Install the supplied rechargeable battery in
the bottom of the headset. Once you place the
headset into the base (Figure 13) it begins
to charge the battery. An LED light will illumi-
nate on the front of the C110 base to confirm
the charging has begun. The light will stay on to
notify that the battery is making contact with
the charger. The battery is not charged when
it comes out of the box. It must be charged
overnight before usage.
Backup batteries may be bought and placed
in the additional charging docks located on
the base. The charging docks are labeled
in Figure 14.
Having extra batteries on hand will enable
you to easily swap batteries, without having
to wait for your current battery to recharge.
When the product is not in use, return the
headset to the base to recharge the battery.
At full volume, the battery will last approxi-
mately four (4) hours. Using lower volumes
will increase the length of the charge. An
indication that the battery should be recharged
might be the sound getting weak or noisy. The
battery takes four (4) hours to fully charge and
and can be fully charged and depleted approxi-
mately five hundred (500) times before
it should be replaced.
All manuals and user guides at all-guides.com
C110 OPERATION
FIG. 13
BACKUP BATTERY CHARGERS
HEADSET CHARGER
FIG. 14
Note: The battery is not
charged when it comes out of
the box. It must be charged
overnight before usage.
11