Adjusting The Headset; Volume Control - Clarity C110 Mode D'emploi

ON
OFF
FIG. 15
Headset front
FIG. 16
FIG. 17
12
All manuals and user guides at all-guides.com
C110 OPERATION

ADjUSTING THE HEADSET

Volume Control

There is a volume control wheel on the top of
the headset where the volume may be controlled
easily. Turn the wheel in the direction of the
"+" to increase volume and toward the "-" to
decrease the volume. See Figure 18 on page 13.
Note: The volume may or may not be affected
by the television volume controls. Please refer
to the television manual or manufacturer for
more information.
Base
Powering On
When the headset arms are extended, the unit
automatically powers on. See Figure 15. When
the headset is removed from the head, the arms
will return to the "off" position. If there is no
audio signal being detected by the C110 for
ninety (90) seconds, it will power down.
Note: The infrared sensor that communicates
with the transmitter base is on the front of the
headset and should remain within sight of the
C110 base. See Figure 16.