It is recommended that the hose be replaced every two years whether it has been used or
not. When replacing the hose, ensure that the replacement hose is suitable for LPG. Hoses
should only be bought from certified gas dealers. Remember, when replacing the hose, to
replace the hose clamps at the same time.
With the exception of the hose and the regulator, there are no user fitted parts available for
this heater. Should the heater not be functioning properly, an authorised service agent must
check it, and if replacement parts are required, they will ensure that the correct parts are
supplied and fitted correctly.
It is recommended to have your heater checked at your local hardware store at the
beginning of every season.
CLEANING
Wipe the exterior of the heater with a soft cloth moistened with a mild detergent.
Do not use metal or furniture polish on the heater.
If the elements appear dusty then clean them using a soft brush or dry cloth.
Only clean the heater when it is cold and not in use.
Do not use abrasive cleaners, as these will damage the paint surface.
When not in use, store the heater by covering and placing it in a cool, dry and dust free
area.
WARNING
Never immerse the unit in water or let water come into contact with the burners.
If you need to return the appliance ensure that:
The unit is packed carefully back into its original packaging.
Proof of purchase is attached.
TROUBLE SHOOTING
Problem
Heater will not light or
runs poorly
All manuals and user guides at all-guides.com
Possible cause and solution
Cylinder is empty. Replace with filled cylinder.
If the cylinder is new, it may not have been purged of air
properly.
Check that the regulator is properly attached and that the
cylinder valve is open (anticlockwise).
Heater components may be dust contaminated or dirty.
Have the heater serviced by an authorised service agent
Try another brand of gas.