Table des Matières
Publicité
Adjusting Handset Receiver Volume
To adjust the handset receiver volume:
1.
2.
3.
4.
Adjusting Speakerphone Receiver Volume
To adjust the speakerphone receiver volume:
1.
2.
3.
4.
Receiving a Call Waiting Call
If you subscribe to call waiting services and are on a call when
another caller calls your phone number, you will hear a "beep"
indicating there is another call coming in. If you subscribe to Call
Waiting ID services, the caller's name and number can be displayed
on the screen. To answer the waiting call and/or switch between
calls:
1.
2.
10
All manuals and user guides at all-guides.com
Lift the handset and listen to the dial tone.
Press the right side of the Volume button to increase the
receiver volume.
Press the left side of the Volume button to decrease the receiver
volume.
Replace the handset when the desired receiver volume is
reached.
Press the Speaker button and listen to the dial tone.
Press the right side of the Volume button to increase the
receiver volume.
Press the left side of the Volume button to decrease the receiver
volume.
Press the Speaker button or the Goodbye button when the
desired receiver volume is reached.
Press and release the Flash button to put the current call on
"hold" and to answer the incoming call. To switch back and
forth between the two calls, press and release the Flash button.
When a Call Waiting call comes in, you may also hang up the
current call in order to pick up the waiting call. When you are
on a call you want to end and another call comes in, hang up
the telephone. The current call will be disconnected and after
a temporary delay, the phone will ring, allowing you to answer
the waiting call.
Publicité
Table des Matières
