Choosing Touch Tone Or Pulse Dialing; Adjusting The Display Angle; Adjusting The Display Contrast - Uniden UCIS-3050C Guide D'utilisation

Choosing Touch Tone or Pulse Dialing

The switch to select tone or pulse dialing is on the rear side of the
phone. Set the switch to TONE for tone dialing or set the switch to
PULSE for pulse dialing.

Adjusting the Display Angle

You can optimize the LCD display by adjusting the viewing angle.
To adjust the LCD viewing angle, move the rear edge of the LCD
module up or down.

Adjusting the Display Contrast

The display can be adjusted to suit the light level of your room and
your viewing preference. To make the contrast of the display lighter
or darker, press the
desired contrast is reached.
8
All manuals and user guides at all-guides.com
Important Note: If you are not sure how to set your
phone, make a trial call with "TONE" dialing. If the call is
connected, leave the switch set to "TONE" dialing. Oth-
erwise, set the switch to "PULSE" dialing.
button to the right of the screen until the