Getting Started - KitchenAid KES6403 Mode D'emploi

GETTING STARTED

First, clean all parts and accessories (See "Care and Cleaning" section).
Place the Espresso Machine on a dry, flat, level surface such as a countertop or table.
1
Fill the Water Tank with fresh water
(max. 47 ounces / 1.4 liters). Replace the
Water Tank Lid.
IMPORTANT: Distilled water or mineral water can damage the Espresso Machine.
Do not use either to brew espresso.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
3
Plug into a grounded 3 prong outlet.
Press the Main power switch to "ON (-)".
W11312156C.indb 5 W11312156C.indb 5
2
MAX
Insert the Steam Wand until you hear a
click.
WARNING
Electrical Shock Hazard
4
The machine automatically pumps water
into the heater and starts heating. When
lights stop blinking, the Espresso Machine
is ready for use.
5
8/12/2020 7:43:38 PM 8/12/2020 7:43:38 PM