Introduction; Description; Use - Cuisinart CJK17BCE Instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4

1. INTRODUCTION

You have just purchased a Cuisinart® cordless electric kettle.
Simple to operate and to maintain, the kettle has a brushed
stainless steel finish design that guarantees you a great resis-
tance to corrosion. It is heat and shock resistant and prevents
calcium build-up.

. DESCRIPTION

1. Brushed stainless steel inside and outside with brushed finish.
1.7L capacity.
. Maximum fill mark "max" located outside the kettle body.
3. Dripless wide mouth spout.
4. Ergonomic stay-cool handle.
5. Lid with integrated removable anti-scale filter.
6. Power "On" switch. Lift up the switch to "on" position to begin
the boiling process. The kettle shuts off automatically once
water has boiled, or when kettle is lifted from power base. The
switch goes back up to its initial position automatically.
7. On indicator light.
8. Power base adapted to any surface.
9. Cord storage. Unwind only as much as you need.
6

3. USE

Before using your Cuisinart® cordless electric kettle for the first
time, we recommend operating the kettle, without consuming
the water,  or 3 times, following the instructions below. This will
remove dust remaining from the manufacturing process.
Instructions
1. Open the lid using the push-button.
. Fill the kettle with as much fresh, cold water as you will need.
The maximum water level is indicated outside the kettle and is
marked by the word "max" (see fig.1).
3. Close the lid of the kettle.
4. Place the kettle on its power base. Ensure that the element on
the bottom of the kettle fits securely on the power base.
5. Plug the power base to the mains.
6. Power the kettle on by pushing up the switch (see fig.). The
indicator light will illuminate to indicate that the boiling
process is on. When the water has boiled, the kettle will
automatically switch off. The switch goes back down and the
indicator light turns off.
Note: The kettle can be switched off at any time before the
water boils, simply by lifting the kettle off the base. The switch
goes back down and the appliance switches off.
Note: the kettle is provided with a boil dry safety cut out.
7. Pour and serve. Pour water out slowly. Return the kettle to the
base after pouring. If you wish to boil the water again, you
must lift up the switch to "on" position again.
fig.1
fig.2

Publicité

Table des Matières
loading

Table des Matières