Goalzero NOMAD 50 Mode D'emploi page 3

GET TO KNOW YOUR GEAR
USB Output Port
4
8mm Chaining 8mm Output
Connector
HOW TO CONNECT
Connect a Nomad 50 Solar Panel to a Goal Zero Yeti Portable Power Station or Sherpa Power Bank by
inserting the 8mm blue-ringed connector into the 8mm input on the units. You can also charge USB devices
by plugging into the built-in USB port.
HOW IT WORKS
Nomad 50
Solar Panel
HOW TO CHAIN
To chain two or three Nomad 50 Solar Panels together, plug the blue ringed connector from one panel
into the input connector or input port of the next panel, using the charging cable from the final panel to
connect to your Goal Zero Yeti or Sherpa 100AC.
If you're chaining more than three Nomad 50 Solar Panels together, or any configuration over 150W,
you will need to purchase a combiner cable from Goal Zero, call our solutions center at 888-794-6250
for more information.
NOTE: Do not plug more than two chained Nomad 50 Solar Panels into anything smaller than the Goal Zero
Yeti 1000 as this will exceed their input ratings.
OPTIONAL CABLES
Goal Zero's 8mm Extension Cables provide greater distance between your solar panels and your power
stations. Purchase these from GoalZero.com.
Goal Zero Yeti 500X Laptop
Portable Power Station
5