STERWINS 1200 BC-2 Mode D'emploi page 257

2. SAFETY INSTRUCTIONS
oil and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected situations.
Service
Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
If the replacement of the supply cord is necessary, this has to be done by
the manufacturer or his agent in order to avoid a safety hazard.
If the carbon brushes need to be replaced, have this done by a qualified
repair person (always replace the two brushes at the same time).
ADDITONAL SAFETY RULES FOR THE BRUSH CUTTER & GRASS
TRIMMER
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Training
a) Read the instructions carefully. Be familiar with the controls and
the correct use of the machine. Please use the machine properly; any
unintended use may cause a danger to people.
b) Never allow children, persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge or people
unfamiliar with these instructions to use the machine. Local regulations
can restrict the age of the operator.
c) Keep in mind that the operator or user is responsible for accidents or
hazards occurring to other people or their property.
d) Note: National regulations may restrict the use of the machine.
e) Keep other people including children, animals and bystanders outside
the 15 meter hazard zone. Stop the machine immediately if you are
EN
256