To turn off and on the PTY Standby Reception
Once you activate the Reception by selecting a
PTY code (see page 17), you can deactivate and
activate it with the same PTY code by
following the procedure below.
1
While listening to an FM broadcast...
MENU
2
Move the cursor to "MODE" on the
Main Menu.
3
Enter the FM MODE Menu.
OK
BAND
The last selected item appears (highlighted)
with the current setting.
4
Select "PTY."
5
Turn off or on the Reception.
PTY code: Activates the Reception with
Off:
To exit from the Menu operation, press
MENU again.
18
The Main Menu appears on
the display.
Cursor
PTY code
(News, Affairs, etc.)
Off
the selected PTY code.
Cancels the Reception.
○ ○ ○ ○ ○ ○ ○ ○ ○
Tracking the same programme—
○ ○ ○ ○ ○ ○ ○ ○ ○
Network-Tracking Reception
When driving in an area where FM reception is
not sufficient enough, this unit automatically
tunes in to another FM RDS station of the
same network, possibly broadcasting the same
programme with stronger signals.
• When shipped from the factory, Network-
Tracking Reception is activated with "AF (see
the next page)" selected.
Programme "A" on
Frequency "01"
"A" on "03"
"A" on "02"
To change the Network-Tracking Reception
setting, follow the procedure below:
1
While playing any source...
The Main Menu appears on
the display.
MENU
2
Move the cursor to "PSM" on the Main
Menu.
"A" on "05"
"A" on "04"
Cursor