Troubleshooting; Radio Reception; Cd Player Operation - auna Kentucky Mode D'emploi

TROUBLESHOOTING

The following checks will assist in the correction of most problems which
you may encounter with your set. Before going through the checklist below,
first check the following points.
Sympton

Radio reception

No radio reception.

CD player operation

Disc does not play
Or sound skips
Sound skips
Unit is not working.
General
Programmed disc play
will not function.
Severe hum or noise.
Possible Causes / Remedies
The MODE selector has not been set to the correct
position.
Press the  and  buttonsto find a radio station.
Switch the AUX IN jack to "OFF".
Press "VOL+" to turn up the volume.
Reload the disc with the label side up.
Clean the disc.
Change the installation location.
Press the ON/OFF button.
Press the STOP button and then program the tracks.
The AC power cord is not connected to an AC wall
outlet.
Check that the power cord is connected firmly.
Push the power button from the "OFF" position to
the "ON" position.
The TV or VCR is too close to the stereo system.
Separate from the TV or VCR.
EN
39