All manuals and user guides at all-guides.com
6
When the power cord is connected to the electrical outlet, the unit is ready for
operating after a short buzzing sound.
1. ON/OFF
Press the
/
ON
OFF BUTTON
When the cooler is running, press the
2. Cooling
If you choose to have your unit operate with only the dehumidification function,
press the
to select the level of cooling. The corresponding
BUTTON
the louvre will open to begin airflow:
(green) for mild cooling.
LO
3. Dehumidifying
Press the
to select the required level of dehumidification, the louvre will
BUTTON
close and the unit will start to dehumidify, the corresponding
(green) for mild dehumidification or
LO
When the relative humidity in the room is high and you want to dry the room quickly,
use the
dehumidification.
HI
4. Fan Speed
Press the
to select the required fan speed, the corresponding
BUTTON
(green) for low speed or
LO
5. Timer
Press the
to select for how many hours the cooler should continue to
BUTTON
operate: 2, 4 or 8 hours, the corresponding
The unit will stop working once the selected time has run down.
When the compressor is shut down due to a power outage, the timer needs to be
reset. But if the compressor is stopped due to water tank full condition or
defrosting, the timer setting will remain as set.
Operation
5
4
3
to switch on. The on/off indicator
/
ON
OFF BUTTON
(orange) for strong cooling or
HI
(orange) for strong dehumidification.
HI
(orange) for high speed.
HI
LED
7
2
1
will turn green.
to switch it off.
LED
will lit:
LED
(2
, 4
or 8
) will turn green.
H
H
H
will light and
will light:
LED