Emptying The Water Tank - American Comfort Worldwide PAC Manuel Du Propriétaire

All manuals and user guides at all-guides.com

Emptying The Water Tank

When the water tank is full, the unit will switch off automatically and beep
15 times, the
TANK FULL LED
to be emptied:
• Make sure unit is unplugged from power source
• Remove the water tank by pulling the clasp under the bottom.
• Empty the water tank.
• Push the water tank gently back in place. Plug the unit back into power
source. When done properly, the
1. Do NOT remove the fl oat sensor device from the water tank. If removed,
the water full sensor will no longer be able to detect the water level
correctly without the fl oat and water may leak from the water tank.
2. If the water tank is dirty, wash it with cold or lukewarm water. Do not use
detergent, scouring pads, chemically treated dust cloths, as these can scratch
and damage the tank and cause water leakage.
3. When inserting the drainage tank, press the tank fi rmly into place with both
hands. If the tank is not positioned properly, the sensor will still be activate,
and dehumidifi cation can not operate.
on the control panel will light up. The tank needs
WATER FULL LED
Water
Tank
Pull
9
will turn off.
Float Sensor
Device