Technical Data - optrel suppliedair Manuel D'utilisation

9. Technical Data

suppliedair
Minimum air flow
Maximum air flow
Weight of unit
Inlet connection
Outlet connection
Noise level of unit
Waist size
Supply pressure range
Temperature range at work
Air humidity range at workplace
Certification
suppliedair Conditioner
Maximum air flow
Weight without filter
Weight including filter
Inlet connection
Outlet connection
Recommended temperature range at work
Recommended air humidity range at workplace
Certification
10. Approval, Certification
Compressed air line systems suppliedair Pressure are tested and approved in complience with the requirements
of the European standard EN 14594:2005 for use either with suppliedair protective hoods or suppliedair protec-
tive masks. All parts of the system used must be approved by the manufacturer and used in complience with the
instructions stated here in this user manual..
Notified body for CE testing:
Declaration of Conformity is available at: https://www.optrel.com/service/downloads/
8
4090.000
Compatible with RECTUS series
25, 26 and CEJN320
4 – 10 bar (4 – 10 bar (400 – 1000 kPa))
Výzkumný ústav bezpečnosti práce, v.v.i. – ZL
Testing Laboratory No. 1024, Jeruzalémská 1283/9, 110 00 Praha 1
Notified Body 1024
160 lpm
250 lpm
280 g
CA40x1/7"
max. 70 dB
60 – 150 cm
+10 to +40 °C
20 % to 80 % Rh
EN 14594 Class 3A
500 lpm
6 300 g
6 800 g
Compatible with RECTUS series 25, 26 a CEJN320.
Compatible with RECTUS series 25, 26 a CEJN320.
0 to +40 °C
20 % to 80 % Rh
Complies with EN 12021, providing the requirements
of TP-610050-1 are met.
4090.010
G1 1/4"