Connecting And Operation - HQ AVSWITCH-70 Mode D'emploi

How to connect the 4port Switch to your Television.
1. Connect the cables from the sources to one of the Switch input connections
2. Connect the cable from your TV, LCD or Plasma into the output of the Switch
3. Plug the power adapter into the Switch
4. Power on the power switch
5. When connections are completed, the signal of input 1 will be distributed to the TV display.
6. For selection of the source it is possible to use the remote control or the source button on the
front of the switch
The Switch will only distribute the input signal to the output connection. This means that the
switch does not covert. So a input S-VHS will still be a S-VHS signal on the output and will not
be convert to component.
Front side:
1) On/Off button
2) IR Remote Sensor
3) LCD Display
4) Joystick Edit Source name
5) S ource button
Toggle from Input 1-> Input 4

Connecting and Operation:

Attention:
Information:
1