Preparations; Speed Settings; Working With Kneading Hook, Whisk And Beater - SilverCrest SKV 1200 A1 Mode D'emploi

Preparations

1) Take all the parts out of the box and remove
the packaging material and any protective
wrapping or stickers .
2) Clean all components as described in the sec-
tion "Cleaning and care" . Ensure that all parts
are completely dry .
3) Place the appliance on a clean and level
surface and attach it firmly in place with the 5
suction cups .
4) Insert the power plug into the socket .

Speed settings

Level Use
all
1 - 2
Kneading
hook 0
Beater w
Beater w
2 - 4
Kneading
hook 0
4 - 6
Beater w
6 - 8
Whisk q
P
Blender t
■ 42
│ GB
suitable for . . .
- Starting position for
all mixing and stirring
processes
- Adding ingredients
- Kneading and mixing
of firm dough or
firmer ingredients
- Mixing thick cake
mixture
- Mixing butter and
flour
- Mixing yeast dough
- Kneading yeast
dough
- Kneading thick cake
mixture
- Cake batter
- Whisking butter with
sugar
- Biscuit dough
- Whipped cream
- Egg white
- Mayonnaise
- Whisking butter until
fluffy
- Mixing and chopping
soft or liquid ingre-
dients
- Crushing ice
Working with kneading hook,
whisk and beater
WARNING! RISK OF INJURY!
► Never place your hands or fingers in the
mixing bowl 6 during operation! Danger
of injury due to rotating parts!
► Do not change accessories unless the drive is
at a complete standstill! After being switched
off, the drive unit will continue to run for a
short time .
► In cases of malfunction, switch the appliance
off and remove the plug from the wall socket
to prevent the appliance from being switched
back on unintentionally .
ATTENTION! PROPERTY DAMAGE!
► When working with the kneading hook 0,
whisk q or beater w we recommend al-
lowing the appliance to cool down after
10 minutes of operation .
NOTE
► When you work with the kneading hook 0,
whisk q or beater w, you should use the
lid 9 of the appliance to prevent the unwanted
leaking of ingredients .
Please proceed as follows to prepare the appli-
ance for operation with the kneading hook 0,
whisk q or beater w:
1) Press down the release lever 2 . The swivel
arm 1 moves upwards automatically . If neces-
sary, move the swivel arm 1 to the highest
position .
2) Insert the mixing bowl 6 in such a way that
the locking tabs on the mixing bowl 6 grip
into the recesses in the base 5 . To do this, one
of the handles must be pointing in the direction
of the rotary switch 3 . Turn the mixing bowl 6
clockwise so that it is locked and firmly held in
place .
SKV 1200 A1