Change Display / Setting - Oregon Scientific msn Direct WMS801 Manuel

To force a search for the signal:
• Press and hold IN / REG. The unit will search for
a signal for 15 minutes. If the radio signal is weak,
it can take up to 24 hours to get a valid signal
reception.
NOTE Signals from household devices such as
doorbells, electronic garage doors, and home security
systems may cause temporary reception failure. This is
normal and does not affect general product
performance. The reception will resume once the
interference ends.
Overlapping coverage
In areas of overlapping city data coverage, the unit will
automatically select data from the tower it gets the best
reception from.
You may be in an area where your Weather Station can
pick up signals from multiple cities. To scan for a
different city:
• Press and hold IN / REG.
• "Scanning" displays when the Weather Station
searches for an MSN Direct radio station.
To see the city where the Weather Station is
receiving data from:
1. Press SELECT until
2. Press and hold MODE.
All manuals and user guides at all-guides.com
is shown in the Clock area.

CHANGE DISPLAY / SETTING

Use the SELECT button to navigate between different
Areas, with appearing on the display in the Area
that is selected:
• Clock / Alarm / Calendar Area
• UVI / Barometer / Rainfall Area
• Temperature / Humidity / Comfort Level Area
1. Press SELECT to switch between Areas.
indicates the selected Area.
2. Most Areas have alternate display options e.g.
Clock / Alarm or UVI / Barometer / Rainfall).
Press MODE to switch options, or ALARM to
switch between clock and alarm.
3. Press and hold MODE for 2 seconds to enter
setting mode.
4. Press UP or DOWN to change settings.
(Press and hold UP or DOWN to quickly scroll
through the values.)
5. Press MODE to confirm.
7