Table des Matières
Publicité
Before calling for service, try the suggestions below to see whether you can solve
your problem without outside help.
AIR CONDITIONER WILL NOT OPERATE
•
The power supply cord is unplugged.
"Electrical Requirements."
•
Time-delay fuse or circuit breaker of the wrong capacity is being used.
Replace with a time-delay fuse or circuit breaker of the correct capacity. See
"Electrical Requirements."
•
The power supply cord has tripped (Reset button has popped out).
release RESET (listen for click; Reset button will latch and remain in) to resume
operation.
•
A household fuse has blown, or a circuit breaker has tripped.
or reset the circuit breaker. See "Electrical Requirements".
•
The On/Off button has not been pressed.
•
The local power has failed.
AIR CONDITIONER BLOWS FUSES OR TRIPS CIRCUIT BREAKERS
•
Too many appliances are being used on the same circuit.
appliances that share the same circuit.
•
You are trying to restart the air conditioner too soon after turning off the
unit. Wait at least 3 minutes after turning off the unit before trying to restart the air
conditioner.
•
You have changed modes. Wait at least 3 minutes after turning off the unit before
trying to restart the air conditioner.
AIR CONDITIONER POWER SUPPLY CORD TRIPS (RESET BUTTON POPS OUT)
•
Disturbances in your electrical current can trip (Reset button will pop out) the
power supply cord. Press and release RESET (listen for click; Reset button will
latch and remain in) to resume operation.
•
Electrical overloading, overheating, cord pinching or aging can trip (Reset
button will pop out) the power supply cord.
and release RESET (listen for click; Reset button will latch and remain in) to resume
operation.
NOTE:
A damaged power supply cord must be replaced with a new power
supply cord obtained from the product manufacturer and must not be repaired.
AIR CONDITIONER SEEMS TO RUN TOO MUCH
•
Is there a door or window open?
with the appliance.
All manuals and user guides at all-guides.com
Plug into grounded 3-prong outlet. See
Wait for power to be restored.
Keep doors and windows closed.
Press ON/OFF.
Unplug or relocate
After correcting the problem, press
29
Press and
Replace the fuse,
Publicité
Table des Matières
