Table des Matières

Publicité

• Dry-Dries the room. The air conditioner automatically selects the temperature. The
fan runs on Low speed only.
NOTE:
Dry mode should not be used to cool the room.
• Fan Only-Only the fan runs. Press FAN button to adjust fan speed.
NOTE:
Auto fan speed cannot be selected in Fan Only mode.
• Heating-Heats the room. Press FAN to select the fan speed. Press the Plus or Minus
TEMP button to adjust the temperature.

SMART MODE

Press the SMART button, Smart mode (fuzzy logic operation) is directly regardless of the
unit is on or off. In this mode, temperature and fan speed are automatically set based on the
actual room temperature.
Operation mode and temperature are determined by indoor temperature.
Heat pump models
Indoor temperature
70ºF (21ºC) or below
70-73ºF (21-23ºC)
73-79ºF (23-26ºC)
Over 79ºF (26ºC)
All manuals and user guides at all-guides.com
SMART
Operation mode
HEATING
FAN ONLY
DRY
COOLING
Target temperature
72ºF (22.2ºC)
Room temperature decreases
3ºF after 3 minutes of
operation
79ºF (26ºC)
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

043-6128-0043-6129-8043-6130-2043-6131-0043-5499-2

Table des Matières