Table des Matières
Publicité
FAN SPEED
1. Press FAN button, Choose desired fan speed.
Auto
• Auto-Automatically controls fan speed depending on current room temperature and
temperature control setting.
• High or maximum cooling.
NOTE:
Auto fan speed cannot be selected in Fan Only mode.
TEMPERATURE
•
Press the UP arrow button to raise the temperature. Press the UP arrow button once to
increase the set temperature by 2°F (1°C), or press twice to increase the set
temperature by 4°F(2°C).
•
•
Press the down arrow to lower the temperature. Press the DOWN arrow button once to
decrease the set temperature by 2°F (1 °C), or press twice to decrease the set
temperature by 4°F (2"C).
•
NOTE:
•
In the Cooling and Heating mode, the temperature can be set between
64 and 90°F (18 and 32°C).
•
In Fan Only mode, Dry, Sleep control and Smart mode control, the
temperature cannot be set.
I FEEL
•
The default setting is I FEEL active. Or you can make it active by press I FEEL button.
•
Press the I FEEL button for about 5 seconds, the signal in the display will disappear,
the I FEEL function will be shunted off.
•
Press the I FEEL button again to activate the function.
IFEEL
DIMMER
•
Press the DIMMER button to turn off the light and display in the unit.
•
Press any button will turn on the light and display again.
All manuals and user guides at all-guides.com
High
Medium
Low
Mid for normal cooling.
UP
DOWN
Low for quieter cooling.
23
Publicité
Table des Matières
