Teka DVI 88-G1 Serie Mode D'emploi page 14

Instructions for use
By pressing the button shown in the figure 1,
you will be able to control the functions of the
extractor.
To achieve better extraction, we recommend
switching on the extractor a few minutes before
starting to cook (3 - 5 minutes) so that the air
flow is continuous and stable when extracting
the fumes.
Likewise, keep the extractor switched on for a
few minutes when cooking is complete to allow
all fumes and odours to be expelled.
1. Lighting
2. Selected speed increase
3. Selected speed decrease
4. Timer
Program the working time
• By pressing + / - turn on the hood and choose
the desired suction speed
• Press the Timer key. The light will start flashing.
• The duration of the programming time is
approximately 15 minutes.
• During the programmed time you can change
the suction speed.
• The Intensive speed is self-programmed and
will switch to speed 2 after approximately 7
minutes.
Fresh Function
•The fresh function consists on activating the
motor at speed 1 for ten minutos each hour. This
function will stay active for 24h or until it is manu-
ally turned off.
• To activate/deactivate this function, press the
" - " button for 3 seconds.
Lights
For changing the light bulbs please contact the
manufacturer's nearest Technical Service.
Lamp code: 81484194